Creative of rainy ....: DIY - How to stitch designer neck in salwar....

9 April 2018

This is a simple photo tutorial for salwar neck design stitching ..

I hope it will help to the people who are trying to stitch their salwars...

This is the normal salwar cutting draft

usually i am using this one to stitch my materials..

but some times based on material type i am changing the measurements little bit..

Then this is canvas this one we use for neck design stiching..

it can stick with cloth by reverse iron.

For neck i measured 3'' for width and 5'' for height

then both sides we leave 1'' for folding

cut the canvas after 1'' measure

Take another piece of cloth with extra 1/2'' measure then the canvas

arrange it like main piece, lining, canvas

for this i am using pins for proper standing..

like this..

stitch over the design line what ever we drew on that..

now leave 1/4'' after the line and cut extra cloth.

give small cuts over the 1/4'' space.. .for neat finishing

now give stitch over the folded lining over canvas..

now turn the lining and canvas like this..

then we need to give neck stitch over the edge,,

stitch the next layer..

That 's it easy neck design made..

For this tutorial i am using normal round neck..

this one for back neck..

If it for front neck we measure 3'' for width and 6'' for height.

If u are choosing other designs ..the same method u can proceed..

but at the design edges u need to give small cuts for easy turning..

i hope this is clear to u all...and helpful also...

any doubt or suggestions please post in comment box..

have a good day..